The various components of a computer system such as the chipset, the graphics card and the hard drive can produce a large amount of heat while operating. This large amount of heat may be harmful for the proper functioning of the system. The fans are responsible for dissipating this heat and maintaining the safe temperature limits.Different processors have different operating temperatures. Higher the speed of the processor, the better the fan need to be. The chassis type is also important as it defines the housing of the assembly and compatibility with the system.In order to buy the right fan for your system, we recommend that you use the Service Tag look up feature in the Parts For Your Dell tool. This will allow us to identify the processor type and speed of your system and select compatible products for it.Please note that some of our replacement products are provided as kits or assemblies. These kits may contain additional parts required for installation; these parts will be listed separately as 'Component Parts' in the Highlights section of this page. In case a product is not sold as a kit or assembly, it may require complementary parts for ease of installation.
The SR650 server supports up to six hot-swap single-rotor system fans that provide N+1 cooling redundancy: Models with one processor ship with five system fans, and models with two processors ship with six system fans.- ThinkSystem SR650 Fan Option Kit (for 2nd Gen processors only; 1st Gen processor options include a fan)
The SR630 server supports up to seven hot-swap system fans that provide N+1 cooling redundancy. SR630 server models with one processor include five system fans, and server models with two processors include seven system fans. The fans are dual-rotor counter-rotating units, which means that the fans have two separate propellors, one in front of the other, and that the propellors rotate in opposite directions.In the case of a system fan failure, performance might be impacted if any of the following processors are installed:- 2nd Gen processors with 200 W or 205 W TDP, or Xeon 6240Y, 6244, 6246, or 6252N processors- 1st Gen processors Xeon 6144, 6146, 6154, 8168, 8180, and 8180MThe installation of a 2nd processor requires an extra cooling fan be installed. For CTO orders, fans are derived by the configurator. For field upgrades, 1st Gen processor option part numbers include this fan however 2nd Gen processor options do not included the fan and it must be ordered separately using SR630 Fan Option Kit
The Side Airflow Duct Kit directs cool air from the front of the enclosure into the intake of side airflow equipment such as networking switches. Air is directed by two, 2 U ducts, mounted in the u-space of the enclosure directly above and below the equipment and a side baffle is used to maintain adequate separation of hot and cold aisles.Includes: Foam gasket strips, Installation guide, Networking switch mounting shelves, Rack mounting hardware, Side airflow ducts, Side baffles.
The various components of a computer system such as the chipset, the graphics card and the hard drive can produce a large amount of heat while operating. This large amount of heat may be harmful for the proper functioning of the system. The fans are responsible for dissipating this heat and maintaining the safe temperature limits. Different processors have different operating temperatures. Higher the speed of the processor, the better the fan need to be. The chassis type is also important as it defines the housing of the assembly and compatibility with the system. In order to buy the right fan for your system, we recommend that you use the Service Tag look up feature in the Parts For Your Dell tool. This will allow us to identify the processor type and speed of your system and select compatible products for it. Please note that some of our replacement products are provided as kits or assemblies. These kits may contain additional parts required for installation; these parts will be listed separately as 'Component Parts' in the Highlights section of this page. In case a product is not sold as a kit or assembly, it may require complementary parts for ease of installation.
Air distribution systems for power dense racks and low pressure areasFits into a standard drop ceiling to provide a connection point for the ducting kit. (Not available on the 1.6kW unit).
