Media converter flexibilityThe Allied Telesis MMCR18 is a two rack unit high chassis, which enables network managers to use up to 18 MMC series media converters in a standard 19 inch rack. For redundancy, it can be powered with either one or two Power Supply Units (PSUs).Power optionsThe MMCR18 Chassis can be powered with either an AC or DC power supply, eliminating the need for multiple power connections. Allied Telesis also offers an optional hot swappable PSU to eliminate network downtime. The unit saves space in the wiring closet, and minimizes the number of power connections required. Single-unit media converters can be removed from the MMCR18 and deployed individually to accommodate network modifications.By incorporating a backplane with 18 different power entry modules integrated with the printed circuit board, power is equally distributed among all media converterswhether using one or two PSUs. Rack-mount designDesigned with a simple mounting system, each individual media converter is plugged into the back plane and secured with the included mounting rail.The rack-mount chassis includes six status LEDs on the front panel indicating power, temperature, fan and fault status.
Next Generation Intelligent Layer 3+ Chassis SwitchThe SBx8106 compact, 4RU advanced Layer 3+ chassis features 6 slots and an included fan module.Total slots: 6Control Fabric Card (CFC) Slots: 1 or 2Line Card Slots: 4 or 5Two system and two PoE power supplies and a fan tray, along with the cards, are all hot-swappable.
Some Shuttle XPCs have a handy connector at the back panel to connect an external power button. In case the XPC is installed in a scenario where it cannot be accessed directly, be it VESA-mounted or otherwise remotely installed, it can still be powered on or off conveniently by using an external push button switch. Shuttle therefore provides a 2-metre cable with fitting connections that only requires a push button switch.
3.5" Hard Disk Rack for 3L slim PC'sThe PHD4 allows for installation of one 3.5" hard drive. However, doing so means no other drives such as a slimline DVD drive or a 2.5" HDD/SSD can be used.
The majority of all surge-induced damage is caused by surges and spikes traveling along unprotected data lines. These surges originate from a wide variety of sources, including static charge buildup and lightning strikes. Left unprotected, your data lines expose network cards, A/V components, modems and other network equipment to damaging electrical transients. The Rack-mount ProtectNet family offers a modular approach to protecting a variety of data lines, including telephone lines, network lines, coax cables and more. Installing any combination of individual surge protection modules into either the four- or 24-position chassis and connecting them to earth ground will prevent back-door surges from ruining your productivity and costing you money.
OverviewThe AT-MCR1 is a single slot, rack-mountablechassis, capable of housing any of the range ofFast Ethernet and Gigabit media converters andbridging media converters.The chassis featuresan internal power supply, which negates theneed to use the external power adaptershipped with the media converter. A front panelLED power indicator shows the user whenpower is applied to the chassis. All thestandalone media converters and bridgingmedia converters can be hot inserted andremoved from the chassis, thus removing theneed to power down the chassis formaintenance and upgrades.The chassis shipswith a rack-mount kit.
OverviewThe AT-MCR1 is a single slot, rack-mountablechassis, capable of housing any of the range ofFast Ethernet and Gigabit media converters andbridging media converters.The chassis featuresan internal power supply, which negates theneed to use the external power adaptershipped with the media converter. A front panelLED power indicator shows the user whenpower is applied to the chassis. All thestandalone media converters and bridgingmedia converters can be hot inserted andremoved from the chassis, thus removing theneed to power down the chassis formaintenance and upgrades.The chassis shipswith a rack-mount kit.
Riser cards are used to extend a slot for a chip or card in a fully loaded computer. This product has been tested and validated for on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system.
The majority of all surge-induced damage is caused by surges and spikes traveling along unprotected data lines. These surges originate from a wide variety of sources, including static charge buildup and lightning strikes. Left unprotected, your data lines expose network cards, A/V components, modems and other network equipment to damaging electrical transients. The Rack-mount ProtectNet family offers a modular approach to protecting a variety of data lines, including telephone lines, network lines, coax cables and more. Installing any combination of individual surge protection modules into either the four- or 24-position chassis and connecting them to earth ground will prevent back-door surges from ruining your productivity and costing you money.
Vertical stand PS01 for Shuttle Slim PCs of the XG/XH seriesThe Shuttle Slim-PCs XG41 and XH61 can be used for horizontal operation by default. With this optional stand (accessory PS01), it can also be placed vertically.
The Shuttle Accessory MY01 is a permanent cover for the upper storage bay on certain Shuttle's 3-litre PCs. This self-adhesive mylar (robust foil) is intended to protect the empty optical drive bay, in case no optical drive is installed which usually protects the drive bay by itself. The MY01 now offers an addional protection so that no harmful objects can get in. This is especially useful in office or educational environments.
The TL-FC1420 14-Slot Rackmount Chassis is specially designed to accommodate 14 TP-Link's Media Converters for central power supply, saving space and power cables. Continuous operation is of great importance to fiber communication, so the chassis is equipped with optional redundant power supply and Hot-Swapping function which allows installing/removing the converter without powering off the chassis. Moreover, to stabilize the performance and extend the lifetime, two cooling fans are installed internally. Together with FC series Gigabit / Fast Ethernet media converters, TL-FC1420 is the ideal solution for your media conversion network.
