D-Links DMC-G01LC standalone media Converter turns a copper Ethernet link into a fiber link, allowing for an ultra-fast, long distance connection. Installation of a standalone media converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, a standalone media converter provides the same high-quality conversion on a unit-by-unit basis. You can save space and cut costs while still extending your network over long distances of 10 km and beyond on a fiber optic line.SFP Optical Transceivers for Maximum FlexibilityThe fiber side of the DMC-G01LC utilizes a 100/1000 SFP port for maximum flexibility. Using the appropriate SFP transceiver (purchased separately) it can support either multimode or single-mode fiber, varying wavelengths, and speeds of either 100 Mbps or 1000 Mbps.10/100/1000 Copper SpeedsThe copper side of the DMC-G01LC auto-negotiates to 10Mbps, 100Mbps or 1000Mbps, ensuring the connection functions at the highest possible speed while remaining compatible with the link partner. It supports auto MDI/MDIX, half/full duplex operation at 10/100 Mbps and full duplex operation at 1000 Mbps.Plug & PlayThe DMC-G01LC supports standard technologies that makes it easy to operate, like 802.3u. 802.3x and 802.3ab. Theres no management software to configure simply connect the power, connect the cables, and start converting.

100W AC system power supply (reverse airflow)

In a world moving toward Smart Cities and the Internet of Things, networks must evolve rapidly to meet new challenges. Our smart technologies ensure that network evolution can keep pace, and deliver efficient and secure solutions for people, organizations and thingsboth now and into the future.

The DPS-200A, DPS-500A and DPS-700 redundant power supplies (RPS) are designed to conform to the wattage requirements of D-Links Fast Ethernet and Gigabit switches. They provide a low-cost, simple solution to the problem of a failure of the internal power-supply of an Ethernet switch, which can result in the shutdown of that switching device, the devices attached to its ports, or an entire network. Supporting full output power for the switch, these redundant power supplies can maximize the availability of the switching device.Redundant Power BackupEach D-Link RPS is equipped with an integrated detection circuit that continuously monitors the switching devices internal power supply. In the event of a power interruption, the redundant power supply is immediately triggered so that the LAN switch and its connected devices can continue providing service. This results in a more reliable network infrastructure and protects the network from a single failure of a network device power supply.Easy and Flexible DeploymentDeployment of a DPS-200A, DPS-500A or DPS-700 does not necessitate any change in configuration of the LAN switch. Each RPS is equipped with a universal internal power supply and can be connected to any AC main power source from 90VAC to 264VAC, 47Hz to 63Hz through a standard AC power cable.The DPS-200A and DPS-500A power supplies are modular, and can be mounted on benchtop/desktop as independent power supply units, or installed in a DPS-800 chassis, which holds two power supplies and mounts in a standard 19-inch equipment rack.The DPS-700 is a 1U high 19-inch standard-size rack mount power supply designed specifically for D-Links PoE switches. Not only does it provide power backup in the event of a power supply failure in the PoE switch, but it also supports PoE power load sharing. It provides an additional 370W of PoE power budget to the switch to support more powered devices.All D-Link redundant power supplies ship with the necessary cables. The one exception is for the DPS-3000-10TC Gigabit switch when used with the DPS-200A power supply. In this case, a DPS-CB150-2PS cable must be separately ordered.DPS-800 Rack-Mount ChassisEach DPS-800 chassis can accommodate up to two DPS-200A or DPS-500A power supply modules in an equipment rack. The DPS-800 occupies 1.25U of rack space and allows users to save space with efficient cabling. All redundant power supply units installed in the chassis connect directly to their power sources and are hot-swappable.D-Link RPS Compatibility ChartDPS-500A:- DGS-3450 - DGS-3120-48TC - DGS-3420-28TC - DGS-3420-28SC - DGS-3420-52T- DGS-3620-28TC- DGS-3620-28SC- DGS-3620-52T

The Allied Telesis AT-SBx81GS24a line card provides 24 SFP Gigabit ports, providing a host of flexible connectivity options.The ability to aggregate a widely distributed network where access devices may be in remote buildings is an excellent solution for multi-building campus environments. The option to mix short-haul and long-haul SFP optical devices in a single line card allows maximum flexibility in the placement of access switches, whether they are located locally or even city-wide.

The Allied Telesis AT-SBx81GS24a line card provides 24 SFP Gigabit ports, providing a host of flexible connectivity options.The ability to aggregate a widely distributed network where access devices may be in remote buildings is an excellent solution for multi-building campus environments. The option to mix short-haul and long-haul SFP optical devices in a single line card allows maximum flexibility in the placement of access switches, whether they are located locally or even city-wide.

Passive PoE AdapterPowers TP-Link products thatsupport 24V passive PoETL-POE2412GPower Your DevicesUse the passive PoE adapter TL-POE2412G to simultaneously supply power and transmit data to a passive PoE device.Convenient Wall-Mounting DesignTL-POE2412G offers a convenient wall-mounting brackets to be easily installed on a wall.Compatible DevicesTL-POE2412G is the recommended power supply for compatible devices.

250W AC system power supply for x930 series, x610 series, AT-x510DP-28GTX and AT-x510DP-52GTX.

300W PoE power supply (for x320-10GH and GS980EM/10H switches)